is a relatively quick-drying, zinc phosphate primer.

is a glossy alkyd enamel which forms a weather resistant coating.

is a fairly quick-drying alkyd paint.

is a quick-drying, urethane-modified alkyd primer.

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish. The product is based on acrylic resin and non-chlorinated plasticizer. Contains zinc phosphate. The product is resistant to salt water, splashes of aliphatic hydrocarbons, animal and vegetable oils.

Hempadur Zinc 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempel's Zinc Primer 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.

Hempel's Galvosil 15780 is a two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. Applicable by airless spray. Hempel's Zinc metal pigment 97170 is in full compliance with ISO 3549 and ASTM D520 type II.

Hempel's Galvosil 15700 is a solvent-borne, self-curing, inorganic zinc rich silicate primer with outstanding resistance against weathering and abrasion. Offers excellent galvanic protection of local mechanical damage. Has excellent chemical resistance within the pH range 6-9. The product is in compliance with the compositional requirements of SSPC Paint 20, Type I, Level 1 and ISO 12944 Part 5, 2018. In full compliance with ISO 3549 and ASTM D520 type II.

Hempathane 55930 is a two-component, high-gloss polyurethane enamel, cured with aliphatic isocyanate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempathane HS 5561B is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention.

Hempathane HS 55613 is a two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zincphosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempathane Topcoat 55214 is a two-component glossy acrylic polyurethane coating with good gloss and colour retention.

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur 4774D is a self-priming, high-build, pure epoxy paint providing both abrasion and corrosion resistance.

Hempadur Avantguard 860 is an activated zinc-rich epoxy primer in compliance with the requirements of Level 1, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Avantguard 770 is an activated, zinc-rich epoxy primer in compliance with the requirements of Level 2, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Avantguard 750 is an activated, zinc-rich epoxy primer in compliance with the requirements of Level 2, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Zinc 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur 85671 is an amine adduct cured, phenolic epoxy (novolac) coating with very good adhesion and excellent chemical and high temperature resistance.

Hempel's Anti-Slint 67500 is flame dried silica sand of which the average particle size is approximately 0.5 millimetres.

Hemucryl Enamel HI-Build 58030 is a water-borne, acrylic dispersion based paint. It dries to a non-yellowing and glossy coating with low dirt pick-up, good weathering properties, and high gloss retention. Especially suited for application by airless spray. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.

Versiline CUI 56990 is a MIO pigmented, fibre reinforced, inorganic co-polymer coating that cures to an inert polymer matrix, able to resist temperatures up to 650°C [1200°F] and thermal shock/cycling in dry or dry/wet service. Conforms to NACE SP0198 - 2017 systems SS-5, CS-6 and CS-8. Approved to Saudi Aramco APCS-11C.

Hempel's Silicone Acrylic 56940 is a heat resistant acrylic modified polysiloxane paint. It is air drying at ambient temperature.

Hempel's Silicone Aluminium 56914 is a heat resistant aluminium pigmented polysiloxane paint which cures to a hard film at ambient conditions. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.

Hempel's Silicone Aluminium 56913 is a heat resistant aluminium pigmented polysiloxane paint. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.

Hempel's Pro Acrylic 55883 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. White shades and light colours may yellow when exposed in indoor environments. It is resistant to water and spillage of aliphatic hydrocarbons. Minimum curing temperature is 0°C/32°F.

Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempathane Topcoat 55214 is a two-component glossy acrylic polyurethane coating with good gloss and colour retention.

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempaxane Light 55030 is a two-component, high-solids, glossy, polysiloxane enamel with excellent gloss and colour retention.

Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. The product meets the requirements of ISO 12944 Part 5, 2019 when used as part of a predefined paint system.

Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. The product meets the requirements of ISO 12944 Part 5, 2019 when used as part of a predefined paint system.

Hempadur Mastic 4588W is a two-component high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.

Hempadur Mastic 45881 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, and has good wetting properties. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy-duty airless spray equipment. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur 35560 is a solvent free, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.

Hemucryl Primer HI-Build 18032 is a water-borne, acrylic dispersion paint with good anticorrosive properties. Especially suited for application by airless spray. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.

Hempadur Avantguard 860 is an activated zinc-rich epoxy primer in compliance with the requirements of Level 1, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Fast Dry 17410 is an epoxy paint, which combines high volume solids with a short drying time. It contains zinc phosphate for better corrosion protection.

Hempadur Avantguard 770 is an activated, zinc-rich epoxy primer in compliance with the requirements of Level 2, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Avantguard 750 is an activated, zinc-rich epoxy primer in compliance with the requirements of Level 2, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Zinc 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Avantguard 550 is an activated, zinc epoxy primer in compliance with the requirements of Level 3, type II in SSPC Paint-20, 2019. Hempadur Avantguard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempaline Defend 740 is a sprayable high performance novolac glass flake vinyl ester tank lining. Hempaline Defend 740 has excellent resistance to organic and inorganic acid solutions, high temperatures and abrasion conditions.

Hempaline Prepare 120 is a vinyl ester primer. This material exhibits outstanding adhesion to steel and concrete as well as to the subsequent topcoat of Hempaline vinyl ester.

Hempel's Zinc Primer 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.

Hempel's Shopprimer ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application. Especially suited, where welding and gas-cutting properties are of importance. The product complies with IMO MSC.215(82) as shopprimer for ballast tank coating systems and IMO MSC.288(87) as shopprimer for cargo oil tank coating systems.

Hempel's Galvosil 15780 is a two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. Applicable by airless spray. Hempel's Zinc metal pigment 97170 is in full compliance with ISO 3549 and ASTM D520 type II.

Hempel's Galvosil Fibre 15750 is a solvent-borne, self-curing, fibre reinforced, inorganic zinc silicate primer with outstanding resistance against weathering and abrasion. Provides expanded tolerance to high film thicknesses and offers excellent galvanic protection of local mechanical damage. The product is in compliance with the compositional requirements of SSPC Paint 20 level 2 and ISO 12944 Part 5, 2018. In full compliance with ISO 3549 and ASTM D520 type II.

Hempel's Galvosil 15700 is a solvent-borne, self-curing, inorganic zinc rich silicate primer with outstanding resistance against weathering and abrasion. Offers excellent galvanic protection of local mechanical damage. Has excellent chemical resistance within the pH range 6-9. The product is in compliance with the compositional requirements of SSPC Paint 20, Type I, Level 1 and ISO 12944 Part 5, 2018. In full compliance with ISO 3549 and ASTM D520 type II.

Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F. The Micaceous Iron Oxide pigmented reddish grey 12430 shade is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces. The greyish yellow 21780 and the grey 11320 shades contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempel's HI-VEE 56540 is a non-hiding, but strongly day-light reflecting acrylic paint with fluorescent pigments which give intense colour impression and high visibility (HI-VEE). It has no effect in darkness, and it needs Hempel's HI-VEE Lacquer 06520 on top in order to improve the light fastness.

Hempatex Enamel 56360 is a physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention. The product is resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.

Hempel's Silvium 51570 is an oleoresinous general purpose aluminium topcoat with good heat resistance and good light reflection. Complies with EU Directive 2004/42/EC, subcategory i.

Hempadur OBM 47150 is an epoxy coating. It forms a hard and tough surface resistant to seawater, mineral oils and splashes from petrol and related products.

Hempalin Undercoat 42460 is a fairly quick-drying alkyd paint.

Hempadur EM 35740 is an ultra-high solids and very low VOC epoxy coating. It has good self-priming properties and is suited for application even under humid conditions and on marginally prepared surfaces. Treated areas, e.g. ballast tanks, can quickly be re-immersed and put back into service. Time to ballast: 8 hours at 20°C [68°F].

Hempel's Uniprimer is a quick-drying primer with rust inhibiting pigments.

Hempaguard X8 is an advanced fouling defence coating based on ActiGuard® technology which utilizes the added effect of advanced hydrogel silicone and an efficient fouling preventing biocide to boost the antifouling barrier, prolong the fouling free period and minimize hull roughness. Hempaguard X8, as part of the Hempaguard MaX system, possesses a very high fuel saving potential and is also suitable for vessels operating with long service intervals (up to 90 months) and/or very long idle periods (up to 120 days). Hempaguard X8 is an advanced fouling defence coating, based on silicone, with high solids content.

Hempaguard X7 is a high solids, advanced fouling defence coating based on ActiGuard® technology which utilizes the added effect of advanced hydrogel silicone and an efficient fouling preventing biocide. This boosts the antifouling barrier and prolongs the fouling free period.

Hempaguard X5 is an advanced fouling defence coating based on ActiGuard® technology which utilizes the added effect of advanced hydrogel silicone and an efficient fouling preventing biocide. This boosts the antifouling barrier and prolongs the fouling free period. HEMPAGUARD X5 therefore possesses a fairly high fuel saving potential. The product is suitable for vessels operating with service intervals up to 36 months and/or long idle periods (up to 60 days). Hempaguard X5 is an advanced fouling defence coating with high solids content. The product is based on silicone, and cures after addition of Crosslinker 98980.

Hempasil X3+ is a third generation, high solids, silicone based, fouling release coating. A hydrogel micro layer prevents fouling organisms from firmly adhering and provides self-cleaning properties. The product provides a smooth, low surface energy and repellent surface with unique fouling release properties.

Hempel's Antifouling Dynamic 9000 is a premium high solids chemically hydrolysing silyl acrylate antifouling. It offers very low friction and predictable polishing performance with low activation time for best-in-class antifouling. It contains a boosted concentration of high grade biocides to prevent fouling under aggressive trading conditions during long DD intervals, inimizing speed loss over time which gives very strong fuel savings potential. Dynamic 9000 comes with Hempel's patented microfibers which gives an unmatched mechanical strength to avoid crackings and peelings. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO documents AFS/CONF/26).

Hempel's Antifouling Dynamic 9000 is a premium high solids chemically hydrolysing silyl acrylate antifouling. It offers very low friction and predictable polishing performance with low activation time for best-in-class antifouling. It contains a boosted concentration of high grade biocides to prevent fouling under aggressive trading conditions during long DD intervals, inimizing speed loss over time which gives very strong fuel savings potential. Dynamic 9000 comes with Hempel's patented microfibers which gives an unmatched mechanical strength to avoid crackings and peelings. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO documents AFS/CONF/26).

Hempel's Antifouling Dynamic 8000 is a top tier high solids chemically hydrolysing SPC antifouling based on Silyl Acrylate Technology. Dynamic 8000 offers low friction, self-smoothening, and very fine control of polishing for optimal performance. The very thin leach layer combined with a strong biocide package with 3 biocides ensures optimal performance particularly in faster sailing ships. The patented microfibers give Dynamic 8000 a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO documents AFS/CONF/26).

Hempel's Antifouling Globic 9500S is a premium, high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers leading low friction properties, self-smoothening and very fine control of polishing for optimal performance. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Globic 9500N is a premium, high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers leading low friction properties, self-smoothening and very fine control of polishing for optimal performance. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Globic 9500M is a premium, high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers class leading low frictional properties, self-smoothening and very fine control of polishing for optimal performance. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Globic 9000 78950 is a premium, high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers leading low friction properties, self-smoothening and very fine control of polishing for optimal performance due to the efficient biocide package. A high polishing rate boosts the performance as more biocides leaches to the surface where a very thin leached layer is maintained. The use of patented microfibre technology increases the mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Globic 9000 78900 is a premium, high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers leading low friction properties, self-smoothening and very fine control of polishing for optimal performance due to the efficient biocide package. A high polishing rate boosts the performance as more biocides leaches to the surface where a very thin leached layer is maintained. The use of patented microfibre technology increases the mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Globic 8000 78550 is a top tier, high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers fine polishing control, low friction, self-smoothening and a best-in-class instant activation of polishing for optimal performance from day one due to the efficient biocide package with three biocides. A high polishing rate boosts the performance as more biocides leach to the surface where a very thin leached layer is maintained. The use of patented microfibre technology ensures extraordinary mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Globic 7000 is a high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). Globic 7000 offers low friction, self-smoothening, and a best-in-class instant activation of polishing for optimal performance from day one. The NAT is therefore especially good for slower steaming and frequent idle days due to the strong biocide package with 3 biocides, very thin leach-layer and fine control of polishing. The patented microfibers give Globic 7000 a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Hempasil 77300 is a biocide free, two component, silicone fouling release coating with a high solids content. The product is based on silicone and cures after addition of Hempasil Crosslinker 97080. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Hempel's Antifouling Globic 6000 75950 is a high solids, chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT). The product offers low friction, self-smoothening and a best-in-class instant activation of polishing and performance for optimal performance from day one. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Oceanic Protect+ 7395W is a high solids, SPC antifouling based on zinc carboxylate and acrylic binders. The product offers a strong predictable antifouling protection through a very stable selfpolishing mechanism, which is based on chemical hydrolysis and an efficient biocide package. The use of improved patented microfibre technology at higher concentrations enables the fibers to fit parallel to the coating surface leading to a controlled polishing throughout the service life, while on the same time offers superior mechanical strength.

Hempel's Antifouling Oceanic+ 73952 is a high solids, SPC antifouling based on zinc carboxylate and acrylic binders. The product offers a strong predictable antifouling protection through a very stable self-polishing mechanism, based on chemical hydrolysis and an efficient biocide package. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Oceanic Flex+ 7390W is a high solids, SPC antifouling based on zinc carboxylate and acrylic binders. The product offers a strong predictable antifouling protection through a very stable selfpolishing mechanism, which is based on chemical hydrolysis and an efficient biocide package. The use of improved patented microfibre technology at higher concentrations enables the fibers to fit parallel to the coating surface leading to a controlled polishing throughout the service life, while on the same time offers superior mechanical strength.

Hempel's Antifouling Oceanic+ 73902 is a high solids, SPC antifouling based on zinc carboxylate and acrylic binders. The product offers a strong predictable antifouling protection through a very stable self-polishing mechanism, based on chemical hydrolysis and an efficient biocide package. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Atlantic+ is a high solids selfpolishing antifouling based on acrylic binders. The robust rosin technology combined with a good biocide package ensure predictable antifouling protection. The patented microfibers give Atlantic+ a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Hempel's Antifouling Olympic Protect+ 7295W is a high solids, self-polishing antifouling. Based on ion exchange technology in combination with a reliable biocide package ensures predictable antifouling protection. The use of improved patented microfibre technology at higher concentrations enables the fibers to fit parallel to the coating surface leading to a controlled polishing throughout the service life, while on the same time offers superior mechanical strength.

Hempel's Antifouling Olympic+ 72950 is a high solids, self-polishing antifouling. The robust rosin technology combined with a good biocide package ensures predictable antifouling protection. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Olympic Flex+ 7290W is a high solids, self-polishing antifouling. Based on ion exchange technology in combination with a reliable biocide package ensures predictable antifouling protection. The use of improved patented microfibre technology at higher concentrations enables the fibers to fit parallel to the coating surface leading to a controlled polishing throughout the service life, while on the same time offers superior mechanical strength.

Hempel's Antifouling Olympic+ 72900 is a high solids, self-polishing antifouling. The robust rosin technology combined with a good biocide package ensures predictable antifouling protection. The use of patented microfibre technology ensures superior mechanical strength to avoid cracking and peeling and reduces maintenance costs during repair.

Hempel's Antifouling Olympic Protect 7195W is a high solids, self-polishing antifouling. Based on ion exchange technology in combination with a reliable biocide package ensures predictable antifouling protection. The use of improved patented microfibre technology at higher concentrations enables the fibers to fit parallel to the coating surface leading to a controlled polishing throughout the service life, while on the same time offers superior mechanical strength.

Hempel's Antifouling Basic is a high solids antifouling based on robust rosin technology combined with a good biocide package for predictable antifouling protection. The patented microfibers give BASIC a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Tiecoat 49183 is an anticorrosive two-component epoxy.

Hempadur Impact is a self-priming, high-build pure epoxy paint that cures to an abrasion, impact and corrosion resistant coating.

Hempadur Easy 47700 is a high-build, pure epoxy coating which cures to a hard and tough coating with good resistance to abrasion and seawater.

Hempadur Ultra-Strength Fibre 47510 is a self-priming, high-build, pure epoxy coating, reinforced with patented fibre technology. It is engineered to withstand the harsh conditions of cargo holds due to the superior resistance to abrasion, impact, cracking and chemical attack. It can be applied at surface temperatures as low as -5°C [23°F] and allows for a very fast return to service due to the fast curing profile.

Hempadur 47182 is an anti-corrosive, modified polyamide adduct cured epoxy.

Hempatex HI-Build 46330 is based on chlorinated rubber. Physically drying. Resistant to salt water, splashes of mineral oils, aliphatic solvents and a wide range of chemicals, but not to animal and vegetable oils or aromatic solvents.

Hempadur Mastic 4588W is a two-component high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.

Hempadur Mastic 45881 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, and has good wetting properties. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy-duty airless spray equipment. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.