CAT HEMPEL MARINE COATING

Caat Hempel menjaga agar kapal tetap pada kondisi terbaik.

Baik untuk kapal yang baru ataupun hanya untuk perkerjaan maintenance, cat Hempel senantiasa menjaga lapisan cat pada kapal dalam kondisi terbaik karena cat Hempel adalah yang terdepan di dalam industri coating dan disertai tenaga teknis yang unggul.

COATING PERFECTION

PT PAPASARI Menawarkan berbagai macam produk cat Hempel yang lengkap berserta technical service, produk cat Hempel senantiasa membantu anda untuk mendapatkan penghematan bbm, memperpanjang usia pemakaian dan mengurangi biaya drydock.

.

Sebagai global supplier untuk produk marine, protective coatings, cat Hempel menawarkan produk dengan kualitas tinggi dan teknisi serta yang terpercaya untuk memberikan saran aplikasi produk yang tepat. Terlepas apakah untuk kebutuhan kapal baru, maintenance ataupun stok di kapal, produk kami akan senantiasa menjaga kapal pada kondisi terbaik lebih lama, dari underwater hull sampai ke cargo tanks dan ballast tanks.

The Experience to Deliver

Cat Hempel telah menjadi supplier marine coatings sejak 1915. Hari ini , nama Hempel di asosiasikan dengan trusted technology, expert technical service dan reliability. 

Hempel meluncurkan produk antifouling untuk kapal pertama di dunia pada 1917. Saat ini masih menjadi pemimpin di dunia untuk produk antifouling dan fouling release technology dan memiliki referensi kerja yang baik dari banyak kapal kapal di dunia.

Trusted Advice

Sebuah solusi  coating yang sukses tentu membutuhkan kualitas di sepanjang proses nya, berawal dari spesifikasi sampai dengan aplikasi dan maintenance.

Hempel menyediakan 600+ coating advisors yang memiliki kualifikasi FROSIO/NACE di shipyards berbagai belahan dunia hanya untuk memastikan anda mendapatkan solusi terbaik, serta tetap menjaga biaya aplikasi dan drydock seminimum mungkin.

A Trusted Partner

Di Hempel, tujuan kami  selalu menjadi bisnis partner jangka panjang yang selalu dapat di andalkan, dan kami fokus untuk memberikan produk dan servis yang terbukti keunggulan nya sehingga bisnis anda dapat mencapai kesuksesan.

Trusted Technology

Hempel fokus pada constant improvement untuk memastikan anda mendapatkan akses pada teknologi terkini, technical service dan teknik aplikasi yang tepat.

Semua produk Hempel melalui test yang sangat ketat – baik di dalam laboratorium, atau pun test raft di berbagai belahan dunia dan juga pada test vessels – sehingga anda selalu tahu bahwa produk Hempel akan selalu memberikan hasil sesuai dengan yang di janjikan.

hempe lcoat

Produk Cat Hempel Marine

  • Hempel’s Zinc Primer 16490

is an one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.

  • Hempel’s Shopprimer ZS 15890

is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application.

  • Hempel’s Shopprimer E 15275

is a two-component epoxy polyamide shopprimer, pigmented with zinc phosphate rust-inhibiting pigments.

  • Hempel’s Galvosil 15700

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

  • Hempel’s Galvosil 15702

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

  • Hempel Galvosil Fibre 15750

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

  • Hempel Galvosil 15780

is a two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. Applicable by airless spray.

  • Hempatex Hi-Build 46330

is based on chlorinated rubber.

  • Hempatex Hi-Build 46410

is a physically drying paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer.

  • Hempatex Enamel 56360

is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention.

  • Hempalin Primer Hi-Build 13200

is a quick-drying, urethane-modified alkyd primer.

  • Hempalin Primer 12050

is a relatively quick-drying, zinc phosphate primer.

  • Hempalin Enamel 52144

is a glossy alkyd enamel which forms a weather resistant coating.

  • Hempalin Undercoat 42460

is a fairly quick-drying alkyd paint.

  • Hempathane Topcoat 55210

is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention.

  • Hempathane HS 55610

is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

  • Hempadur OBM 47150

is a two-component, high build epoxy paint.

  • Hempadur 47182

is an anti-corrosive two-component, modified polyamide adduct cured epoxy used as a tie-coat between epoxy and physically drying coatings.

  • Hempadur Ultra-Strength Fibre 47510

is a self-priming, two-component, high build, pure epoxy paint reinforced with patented Fibre technology.

  • Hempadur Easy 47700

is a two-component high build pure epoxy paint which cures to a hard and tough coating with good resistance to abrasion and sea water.

  • Hempadur Impact 47800

is a high-performance epoxy cargo hold coating offering strong protection against abrasion, impact and corrosion.

  • Hempadur Multi-Mil 35430

is a high-build, high solids, two-component, epoxy paint.

  • Hempadur Spray-Guard 35490

is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating.

  • Hempadur Spray-Guard 35493

is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating.

  • Hempadur 35560

is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.

  • Hempadur EM 35740

is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces.

  • Hempadur Multi-Strength GF 35870

is an amine-adduct cured epoxy coating – the product is reinforced with Glassflakes.

  • Hempadur 45141

is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Hempadur 45141 is intended for use in warmer climates.

  • Hempadur 45143

is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

  • Hempadur 45182

is a two-component, low-temperature curing, modified polyamide adduct cured epoxy.

  • Hempadur 15460

is a high solids amine adduct cured pure epoxy tank coating resistant to continuous immersion in a range of chemicals, including crude oil up to 80ºC/176ºF.

  • Hempadur 15500

is a two-component, amine adduct cured phenolic epoxy (novolac) paint.

  • Hempadur 15553

is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.

  • Hempadur 15570

is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F.

  • Hempadur 15590

is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

  • Hempadur 15600

is a two-component, amine adduct cured pure epoxy paint with excellent adhesion to steel, resistance to crude oil and most refined oil products.

  • Hempadur Multi-Strength 45751

is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. Hempadur Multi-Strength 45751 is intended for use in warm climates.

  • Hempadur Multi-Strength 45753

is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. Hempadur Multi-Strength 45753 is intended for use in cold climates.

  • Hempadur Mastic 45880

is a two-component polyamide adduct cured, high solids, high build epoxy paint.

  • Hempadur Mastic 45881

is a two-component polyamide adduct cured, high solids, high build epoxy paint.

is a two-component, amine adduct cured phenolic epoxy (novolac) coating.

  • Hempadur Zinc 17360

A two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage.

  • Hempadur Quattro 17634

is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

  • Hempadur Quattro XO 17720

is a PSPC qualified, two-component, pure epoxy universal primer with excellent abrasion resistant and anticorrosive properties.

  • Hempadur Quattro XO 17770

is a PSPC qualified, two-component, pure epoxy universal primer with extended overcoat interval, excellent abrasion resistant and anticorrosive properties.

  • Hempadur Quattro XO 17820

is a PSPC qualified, two-component, pure epoxy universal primer with 80% solid volume, excellent abrasion resistant and anticorrosive properties.

  • Hempadur Quattro XO 17870

is a PSPC qualified, two-component, pure epoxy universal primer with 80% solid volume, extended overcoat interval, excellent abrasion resistant and anticorrosive properties.

  • Hempadur Quattro ALU 45604

is a two-component aluminium pigmented universal epoxy paint, which cures to a hard and tough coating with superior anticorrosive properties and good resistance to abrasion, seawater and various oils.

  • Hempel’s Antifouling Basic 71950

is a high solids selfpolishing antifouling based on acrylic binders.

  • Hempel’s Antifouling Olympic+ 72950

is a reliable rosin-based antifouling for protection in not overly aggressive fouling conditions.

  • Hempel’s Antifouling Atlantic + 73850

is a high solids selfpolishing antifouling based on acrylic binders. The robust rosin technology combined with a good biocide package ensure predictable antifouling protection.

  • Hempel’s Antifouling Oceanic+ 73902

is a high solids SPC antifouling based on zinc carboxylate and acrylic binders.

  • Hempel’s Antifouling Oceanic+ 73952

is a high solids SPC antifouling based on zinc carboxylate and acrylic binders.

  • Hempel’s Antifouling Globic 6000 75950

is a high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology.

  • Hempel’s Antifouling Globic 7000 78350

is a high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT).

  • Hempel’s Antifouling Globic 8000

is a top tier high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT).

  • Hempel’s Antifouling Globic 9000 78900

is a premium antifouling coating for up to 90 months in aggressive waters.

  • Hempel’s Antifouling Globic 9000 78950

is a premium antifouling coating for up to 90 months in aggressive waters.

  • Hempel’s Antifouling Globic 9500 M

is a premium high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology.

  • Hempel’s Antifouling Globic 9500 S 7895S

is a premium high solids chemically hydrolysing antifouling based on Nano Acrylate Technology.

  • Hempel’s Antifouling Dynamic 8000

is a top tier high solids chemically hydrolysing SPC antifouling based on Silylated Acrylate Technology.

  • Hempel’s Antifouling Dynamic 9000 79900

is a premium high solids chemically hydrolysing SPC antifouling based on Silyl Acrylate Technology.

  • Hempel’s Antifouling Dynamic 9000 79950

is a premium high solids chemically hydrolysing SPC antifouling based on Silylated Acrylate Technology.

  • Hempasil 77300

is a biocide free, two component, silicone fouling release coating with a high solids content.

  • Hempasil X3+

is a third generation fouling release coating with high solids content.

  • Hempaguard X5 89700

is a cost effective fouling defence coating for docking intervals of 36 months. The combination of low friction and effective biocide makes it suitable for any trading pattern as well as extended idle time for the vertical sides and flat bottom of most ship types.

  • Hempaguard X7 89900

is a cost effective fouling defence coating for docking intervals of 90 months. The combination of low friction and effective biocide makes it suitable for any trading pattern as well as extended idle time for the vertical sides and flat bottom of most ship types.

  • Hempel’s Thinner 08080

For PU, Acrylic, AntiFouling

  • Hempel’s Thinner 08230

For Alkyd

  • Hempel’s Thinner 08450

For Epoxy

  • Hempel’s Uni-Primer 13140

is a quick-drying, one-component primer with rust-inhibiting pigments.

  • Hempel’s Galvosil 15700

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

  • Hempel’s Shopprimer ZS 15890

is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application.

  • Hempel’s Nexus II 27400

is a three component silicone based tiecoat with anticorrosive properties.

  • Hempasil Nexus X-Tend 27500

is a high solid one component silicone based tiecoat for repair and touch-up areas of existing fouling release systems.

  • Hempel’s Epoxy Filler 35250

is a two-component, solvent-free, epoxy filler, which when fully cured – is resistant to water, aliphatic hydrocarbons, and related products.

  • Hempel’s Silvium 51570

is an oleoresinous general purpose aluminium paint with good light reflection.

  • Hempel’s Hi-Vee 56540

is a non-hiding, but strongly day-light reflecting acrylic paint with fluorescent pigments which give intense colour impression and high visibility (Hivee).

  • Hempel’s Silicone Aluminium 56914

is a heat resistant aluminium pigmented polysiloxane paint.

  • Hemucryl Enamel Hi-Build 58030

is a water-borne, acrylic dispersion based paint.

  • Hempel’s Anti-Slip Pearls 67420

are hollow, aluminium silicate spheres (“glass pearls”) of diameters between 5 and 300 micron.

  • Hempel’s Anti-Slint 67500

is flame dried silica sand of which the average particle size is approximately 0.5 millimetres.